Description
UMI over the years has used 4 different part number bushings in UMI control arms measuring 4 different sizes. In order to replace the bushings in your control arms you must remove a bushing from the control arm and locate the 4 digit part number engraved in the bushing. UMI has no way of supplying the correct bushings without this part number.
Note: Each control arm end takes (2) bushings, or “halves”. Therefore, you will need (2) of these bushings to redo (1) control arm end. i.e.- One set of rear or front lower control arms use 8 bushing halves total. Upper rear control arms use 4 bushing halves total.
Stamped with 90032-R
Commonly used prior to 2013 but may be used at any time. Always check stamped p/n before ordering.