225558-1S – 2016-2024 Camaro Coilover Setup, Front & Rear, Viking Struts, Street

$3,419.98

See fitment note
SKU: 225558-1S Tag:
Complete Coilover System

225558-1S – 2016-2024 Camaro Coilover Setup, Front & Rear, Viking Struts, Street

Total suspension transformation for street and occasional track use. Complete bolt-on front and rear coilover kit featuring Viking Berserker damping, UMI caster/camber plates, and double-shear rear mounts.

Berserker Valving 4-Wheel Coilovers Engine Bay Adjust Double-Shear Mounts Bolt-On Install
Dual-purpose performance with Viking Berserker double adjustable damping
Precise front alignments using 2024 aluminum caster/camber plates
Robust double-shear mounts replace weak factory rear brackets
Street-biased spring rates providing a firm but comfortable ride

Description

Transform your 6th Gen Camaro's handling and stance with the UMI 225558-1S Complete Street Coilover System. Engineered for enthusiasts who demand sharp turn-in and acceleration stability without punishing ride quality, this four-wheel true coilover conversion pairs UMI's premium suspension hard parts with Viking Berserker double adjustable dampers. The system utilizes 300 lb/in front and 400 lb/in rear linear-rate springs to deliver responsive body control for back roads and weekend track days, while UMI's front take-up springs keep the main coils seated quietly during full suspension droop.

Designed specifically for 2016–2024 Chevrolet Camaro models, this direct bolt-on system provides massive adjustability. UMI's 2024 aluminum front caster/camber plates allow up to 1.25 degrees of camber and 1.75 degrees of caster adjustment right from the engine bay. In the rear, UMI’s robust double-shear upper brackets eliminate factory single-shear flex to safely support the coilover transition. Track-tested at UMI Motorsports Park and manufactured 100% in the USA, this kit is the ultimate dual-purpose handling upgrade. (Note: Magneride-equipped vehicles require a separate delete kit).

Product Features

Complete 4-wheel Viking coilover system
Viking Berserker double adjustable dampers
300 lb/in front & 400 lb/in rear springs
2024 aluminum caster/camber plates
Double-shear rear upper shock mounts
Independent engine bay alignment tuning
Front take-up springs eliminate droop noise
100% bolt-on installation
Fitment Note: A MagneRide delete module is required when using Viking, Penske, or other aftermarket shocks when installed on vehicles equipped with factory MagneRide struts. This module bypasses the MagneRide system and eliminates error codes on the dash.

Detailed Features

Viking Berserker dampers: Double adjustable struts and shocks provide independent compression and rebound tuning at all four corners for precise ride quality control.
Street-biased coilover springs: 300 lb/in front and 400 lb/in rear springs deliver a firm, responsive feel ideal for performance street driving and occasional track days.
Engine bay adjustments: UMI 2255 front plates allow up to 1.25 degrees of camber and 1.75 degrees of caster adjustments quickly without removing front wheels. *(Note: Front toe alignment will need to be reset any time Caster/Camber is changed.)*
Double-shear rear mounts: UMI 2258 laser-cut brackets dramatically improve rear shock mounting strength over the weak factory single-shear setup.
Take-up spring kit: UMI auxiliary front springs maintain main spring preload and reduce suspension clunking at full droop.
Ride height adjustable: Threaded shock bodies front and rear allow you to lower the center of gravity and dial in the perfect stance or corner balance.
Heavy-duty spherical bearings: Interference press-fit bearings in the front plates eliminate strut mount deflection for crisp, instant steering response.
Direct bolt-on fitment: Installs into factory mounting locations without cutting or welding (Magneride cars require a delete module).

Product Outcomes

Lowers ride height and center of gravity for a more aggressive, customizable stance.
Improves overall handling balance, steering response, and rear traction.
Adapts quickly from comfortable street cruising to firm track damping.
Eliminates suspension slop through spherical bearings and rigid double-shear mounts.

Installation Summary

Overview & Difficulty: Moderate DIY install requiring standard and metric sockets, wrenches, an impact tool, floor jacks, and jack stands; 4–8 hours total. Involves removing factory front struts, rear shocks, and divorced rear coil springs. Install UMI front plates and rear double-shear brackets into factory locations. Assemble the Viking coilovers and mount them into the vehicle. Reuse front lower knuckle bolts (tap splines out gently, spin nuts only). Torque front lower bolts to 140 ft-lbs and rear upper bolts to 70 ft-lbs. Magneride-equipped vehicles require disconnecting wiring and using a delete kit. Professional alignment highly recommended. Please note that front toe alignment will need to be reset any time Caster/Camber is changed

What’s Included:
  • UMI 2255 caster/camber plate assemblies (L/R) ×1
  • UMI 2258 double-shear rear upper mounts ×2
  • Viking Berserker double adjustable front struts & rear shocks
  • 300 lb/in front and 400 lb/in rear coilover springs
  • UMI 90090 front take-up spring kits ×2
  • Complete Grade 8 and stainless hardware

Is This Product Right for You?

The UMI 225558-1S complete system completely revamps 6th Gen Camaro suspension, offering wide-range adjustability and responsive street manners for dual-purpose enthusiasts. By combining front camber plates, rear double-shear mounts, and tunable Berserker coilovers, drivers gain total control over ride height, damping, and alignment in one comprehensive package.

Best For
Street/strip and autocross drivers seeking sharp handling without a harsh daily ride.
Enthusiasts wanting complete four-wheel control over ride height, damping, and alignment.
Builders upgrading from factory divorced springs to a true full-coilover setup.
Not Ideal For
×
Dedicated national-level autocross or track cars needing higher spring rates (see 225558-1R).
×
Owners wanting to retain factory Magneride electronic damping functionality.
×
Stock restorations not interested in lowering or tuning the suspension.

Product FAQ

What vehicles does this complete UMI coilover system fit?
The 225558-1S kit is a direct fit for all 2016–2024 6th Gen Camaro models, providing a complete front and rear suspension overhaul.
Can I use this system on a daily driven Camaro?
Yes. This Street kit is specifically tuned for dual-purpose use, featuring 300 lb/in front and 400 lb/in rear springs paired with Viking Berserker valving for comfortable street manners.
Does this kit allow me to lower my ride height?
Yes. The included Viking front struts and rear shocks are fully threaded coilovers, allowing you to adjust ride height, perfect your stance, and corner-balance the vehicle.
How do the front caster/camber plates improve handling?
They allow both caster and camber adjustment directly from the engine bay using hand tools, eliminating the need to remove wheels for trackside tuning. Note that front toe alignment will need to be reset any time Caster/Camber is changed.
Why does the kit include rear upper mount brackets?
The UMI 2258 double-shear rear mounts replace the weak factory single-shear design, providing the required strength and rigidity to safely run a true rear coilover.
What adjustments can I make to the Viking dampers?
The Viking Berserker dampers offer independent compression and rebound adjustment at all four corners, giving you total control over ride quality and weight transfer.
Will I need to cut or weld my chassis to install this kit?
No. The entire system features a 100% bolt-on installation using factory mounting points and supplied premium hardware.
Will this fit cars with factory Magneride?
The hard parts will bolt on perfectly, but replacing the factory Magneride system requires a separate Magneride delete kit to prevent dashboard error lights.

KIT ITEMS

This item is a kit containing the following items:

THIS PRODUCT FEATURES

Designed & Manufactured in the USA

North American Raw Materials

Precision Laser Cut Components

Precision Welds

About Viking Performance

Viking Performance, Inc. specializes in high-performance double adjustable shock absorbers and related products. Founded in 2011 by experienced racing enthusiasts, the company identified a gap in the market for affordable double adjustable shocks, allowing customers to optimize their vehicle's ride quality by independently tuning compression and rebound settings. By focusing solely on these products, Viking keeps prices competitive with single adjustable shocks, offering better performance without unnecessary costs.

Viking conducts all aspects of design, research, and manufacturing in-house, ensuring quick responses to market changes. The company has received prestigious awards like SEMA's Best Engineered Award and has expanded its product line to include various shock types, such as patented race-only Crusader shocks and lightweight aluminum struts. With a commitment to value and quality, Viking aims to provide exceptional products for racing and performance enthusiasts at accessible prices.

FinishAnodized, Black Powder Coat
AdjustableYes
Fitment
MaterialAluminum, Mild Steel
Platform
UOMPair
Manufacturer
ModificationsNone
HardwareIncluded
Direct Bolt-OnYes
Why Choose

UMI Performance

21 Years In The Industry

Shipping Guidelines

Flat Rate Shipping ($12.95) is only offered on Retail orders over $149 shipped via Ground in the Continental United States.

All International customers are responsible for any applicable duties and/or taxes incurred on your shipment upon delivery.

Return Information

All returns are subject to the authorization of UMI Performance, Inc. Please email [email protected] for a Returned Merchandise Authorization (RMA) number. Our Sales team will either authorize or deny the request for return at its discretion. Any product returned without an issued RMA number will not be credited. All returns must be made within 30 days of delivery, be in new condition, be in original sealed packaging and include the RMA number on the outside of the packaging. No exceptions. All products and their packaging must be in new and unopened condition. Products that have been altered, installed, or modified are not returnable. All shipping costs for returns are the responsibility of the customer. All returns are subject to a 20% restocking fee as well as the original shipping charges that UMI Performance may have incurred while shipping your order.

Due to the majority of Viking products being drop shipped, we can not offer returns on any Viking products. If you purchase a Viking product be sure it fits your application. If you need technical assistance prior to placing order please contact [email protected]

This '225558-1S - 2016-2024 Camaro Coilover Setup, Front & Rear, Viking Struts, Street' fits the following platforms:

Fitment Note: A MagneRide delete module is required when using Viking, Penske, or other aftermarket shocks when installed on vehicles equipped with factory MagneRide struts. This module bypasses the MagneRide system and eliminates error codes on the dash.

2016-2024 Chevrolet Camaro

  • 2016-2014 Chevrolet Camaro

This 225558-1S - 2016-2024 Camaro Coilover Setup, Front & Rear, Viking Struts, Street fits the following vehicles:

Chevrolet

Camaro

    RELATED PRODUCTS