2258 – 2016-2024 Camaro Coilover Mount Kit, Rear, Upper
Convert your 6th Gen Camaro to a true coilover rear suspension. Double-shear, laser-cut brackets that adapt Viking, Penske, and Koni dampers without cutting or welding.
6452F - 1963-1987 GM C10 Front Lowering Springs, 2" drop
$149.99
643233 - 1973-1987 GM C10 Street Performance A-Arm Kit
$1,488.99 – $1,568.99Price range: $1,488.99 through $1,568.99
6410 - 1973-1987 GM C10 Flip Kit
$149.99
303233 - GM A-Arm Kit, Delrin Bushings, Standard Upper Ball Joints
$1,389.99
383001 - 1982-2003 S10/S15 Handling Kit, Corner Max, Race/Street Handling
$2,948.99
3833 - 1982-2003 S10/S15 Sway Bar, Front , Solid, 1-¼”
$259.99
3059 - Competition Front End Kit
$2,259.99 – $2,309.99Price range: $2,259.99 through $2,309.99
Convert your 6th Gen Camaro to a true coilover rear suspension. Double-shear, laser-cut brackets that adapt Viking, Penske, and Koni dampers without cutting or welding.
UMI's 2258 Rear Upper Coilover Mounts are the high-performance foundation you need to convert your 6th Gen Camaro to a true coilover rear suspension. By replacing the factory single-shear upper shock mount with a robust, laser-cut double-shear bracket, these mounts provide unmatched strength and rigidity. The race-inspired floating sleeve system ensures proper hardware alignment, delivering precise handling and reliable performance under extreme cornering loads.
Designed as a direct bolt-in upgrade for 2016–2024 Camaro models, the 2258 kit requires no chassis cutting or welding. It easily accommodates popular aftermarket coilover dampers, including Viking, Penske, and Koni. Proudly engineered, race-tested, and manufactured 100% in the USA, this kit includes everything needed to create a solid rear suspension setup for the street, strip, or road course.
Overview & Difficulty: Moderate DIY install requiring basic tools, jack stands, and a floor jack; approximately 2–4 hours. Process involves removing rear wheels, fender liners, factory shocks, and coil springs. Bolt the UMI brackets into the factory location (torque M10 nuts to 30-35 ft/lbs), assemble coilovers, and mount the top with the provided 1/2-inch bolt and spacer (torque to 70 ft/lbs). Reattach the lower shock mount. Magneride-equipped vehicles will require disconnecting the factory wiring harness.
The UMI 2258 upper mounts are the critical missing link for 6th Gen Camaro owners looking to ditch the factory divorced spring setup in favor of true coilovers. By providing a rigid double-shear mounting point, these brackets allow enthusiasts to safely run Viking, Penske, or Koni coilover systems to achieve perfect ride height and precise corner-weighting.
Designed & Manufactured in the USA
Durable Powder-Coat
North American Raw Materials
Precision Laser Cut Components
Precision Welds
| Finish | Black Powder Coat |
|---|---|
| Fitment | 2016-2024 Chevrolet Camaro |
| Material | Mild Steel |
| Platform | 2016-2024 Camaro |
| UOM | Pair |
| Manufacturer | UMI Performance |
| Modifications | None |
| Hardware | Included |
| Direct Bolt-On | Yes |
21 Years In The Industry
Proudly partnering with leading USA steel suppliers, we source the finest North American mined and milled steel
Machine-guided DOM tubing bends maintain correct geometry while maintaining material strength.
We take North-American sourced plating and precision-cut each component with the latest laser-cutting technology.
Each finished part is properly prepped and coated with high quality Tiger Dry Lac powder coat, providing a tough long-lasting finish.
Our highly-skilled welders and robotic-welders provide consistent welds and ultimate part penetration.
We take pride in providing 100% USA-Manufactured suspension components.
Flat Rate Shipping ($12.95) is only offered on Retail orders over $149 shipped via Ground in the Continental United States.
All International customers are responsible for any applicable duties and/or taxes incurred on your shipment upon delivery.
All returns are subject to the authorization of UMI Performance, Inc. Please email [email protected] for a Returned Merchandise Authorization (RMA) number. Our Sales team will either authorize or deny the request for return at its discretion. Any product returned without an issued RMA number will not be credited. All returns must be made within 30 days of delivery, be in new condition, be in original sealed packaging and include the RMA number on the outside of the packaging. No exceptions. All products and their packaging must be in new and unopened condition. Products that have been altered, installed, or modified are not returnable. All shipping costs for returns are the responsibility of the customer. All returns are subject to a 20% restocking fee as well as the original shipping charges that UMI Performance may have incurred while shipping your order.
Due to the majority of Viking products being drop shipped, we can not offer returns on any Viking products. If you purchase a Viking product be sure it fits your application. If you need technical assistance prior to placing order please contact [email protected]
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account