PRODUCT DESCRIPTION
UMI over the years has used 4 different part number bushings in UMI control arms measuring 4 different sizes. In order to replace the bushings in your control arms, you must remove a bushing from the control arm and locate the 4 digit part number engraved in the bushing. UMI has no way of supplying the correct bushings without this part number. Each control arm end takes (2) bushings, or "halves". Therefore, you will need (2) of these bushings to redo (1) control arm end. For example, one set of rear or front lower control arms use 8 bushing halves in total, while upper rear control arms use 4 bushing halves in total. Stamped with 90032-R, these bushings were commonly used prior to 2013 but may be used at any time. Always check the stamped part number before ordering to ensure compatibility.
PRODUCT FEATURES
- UMI has used 4 different part number bushings in control arms
- Bushings come in 4 different sizes
- To replace bushings, must locate 4 digit part number engraved on the bushing
- Each control arm end requires 2 bushings
- One set of rear or front lower control arms use 8 bushing halves total
- Upper rear control arms use 4 bushing halves total
- Bushings stamped with 90032-R
- Commonly used prior to 2013, but may still be used
- Always check stamped part number before ordering
Manufacturer |
---|
UMI Performance
21 Years In The Industry
North American Raw Materials
Proudly partnering with leading USA steel suppliers, we source the finest North American mined and milled steel
Precision Bent DOM Tubing
Machine-guided DOM tubing bends maintain correct geometry while maintaining material strength.
Laser Cut Plating
We take North-American sourced plating and precision-cut each component with the latest laser-cutting technology.
Durable Powder Coating
Each finished part is properly prepped and coated with high quality Tiger Dry Lac powder coat, providing a tough long-lasting finish.
Consistent Welds
Our highly-skilled welders and robotic-welders provide consistent welds and ultimate part penetration.
100% USA Made
We take pride in providing 100% USA-Manufactured suspension components.
Components
Manufacturing
Welds
Shipping Guidelines
Flat Rate Shipping ($12.95) is only offered on Retail orders over $149 shipped via Ground in the Continental United States.
All International customers are responsible for any applicable duties and/or taxes incurred on your shipment upon delivery.
Return Information
All returns are subject to the authorization of UMI Performance, Inc. Please email [email protected] for a Returned Merchandise Authorization (RMA) number. Our Sales team will either authorize or deny the request for return at its discretion. Any product returned without an issued RMA number will not be credited. All returns must be made within 30 days of delivery, be in new condition, be in original sealed packaging and include the RMA number on the outside of the packaging. No exceptions. All products and their packaging must be in new and unopened condition. Products that have been altered, installed, or modified are not returnable. All shipping costs for returns are the responsibility of the customer. All returns are subject to a 20% restocking fee as well as the original shipping charges that UMI Performance may have incurred while shipping your order.
Due to the majority of Viking products being drop shipped, we can not offer returns on any Viking products. If you purchase a Viking product be sure it fits your application. If you need technical assistance prior to placing order please contact [email protected]
RELATED PRODUCTS
In stock
In stock
In stock
In stock
In stock