PRODUCT DESCRIPTION
UMI’s rear spring spacers are the perfect solution for achieving the ideal stance or preventing tire rub on your GM A, G, and F-body vehicles. Made of zinc-coated, laser-cut mild steel, these spacers come in 1/8” and 3/16” thickness and can be stacked safely for additional adjustment. They offer an easy way to adjust the rear ride height without the need for cutting, welding, or drilling. It is recommended to use these spacers for fine-tuning purposes only, and the installer is responsible for determining the maximum adjustment amount. The spacers are designed to be installed on the upper perch, although the lower perches on F-body models may also be suitable. Manufactured, tested, and raced in the USA in Philipsburg, PA, the P/N 0063 spacer is a 3/16” thick spacer. Please note that while these spacers are designed for GM A, G, and F-body vehicles, they may also work on other models. To ensure proper fitment, verify measurements of OD= 3-3/4” and ID= 2-7/8”.
PRODUCT FEATURES
- Zinc coated, laser cut mild steel spacers
- Available in 1/8” and 3/16” thickness
- Can be safely stacked
- Easy way to fine tune rear ride height for GM A, G, and F-body
- No cutting, welding, or drilling required
- Recommended for fine-tuning only
- Maximum adjustment amount is installer's responsibility
- Normal installation position is on upper perch
- Lower perches may have adequate height (F-Body only)
- Manufactured, tested, and raced in Philipsburg, PA
- USA
- Part number 0063 is for one 3/16” spacer
- Measurements for fitment verification: OD= 3-3/4”, ID= 2-7/8”
This Product Features
Designed & Manufactured in the USA
North American Raw Materials
Precision Laser Cut Components
Manufacturer |
---|
UMI Performance
21 Years In The Industry
North American Raw Materials
Proudly partnering with leading USA steel suppliers, we source the finest North American mined and milled steel
Precision Bent DOM Tubing
Machine-guided DOM tubing bends maintain correct geometry while maintaining material strength.
Laser Cut Plating
We take North-American sourced plating and precision-cut each component with the latest laser-cutting technology.
Durable Powder Coating
Each finished part is properly prepped and coated with high quality Tiger Dry Lac powder coat, providing a tough long-lasting finish.
Consistent Welds
Our highly-skilled welders and robotic-welders provide consistent welds and ultimate part penetration.
100% USA Made
We take pride in providing 100% USA-Manufactured suspension components.
Components
Manufacturing
Welds
Shipping Guidelines
Flat Rate Shipping ($12.95) is only offered on Retail orders over $149 shipped via Ground in the Continental United States.
All International customers are responsible for any applicable duties and/or taxes incurred on your shipment upon delivery.
Return Information
All returns are subject to the authorization of UMI Performance, Inc. Please email [email protected] for a Returned Merchandise Authorization (RMA) number. Our Sales team will either authorize or deny the request for return at its discretion. Any product returned without an issued RMA number will not be credited. All returns must be made within 30 days of delivery, be in new condition, be in original sealed packaging and include the RMA number on the outside of the packaging. No exceptions. All products and their packaging must be in new and unopened condition. Products that have been altered, installed, or modified are not returnable. All shipping costs for returns are the responsibility of the customer. All returns are subject to a 20% restocking fee as well as the original shipping charges that UMI Performance may have incurred while shipping your order.
Due to the majority of Viking products being drop shipped, we can not offer returns on any Viking products. If you purchase a Viking product be sure it fits your application. If you need technical assistance prior to placing order please contact [email protected]
RELATED PRODUCTS
In stock
Out of stock
Out of stock
In stock
In stock