2534 – 2016-2024 Camaro Rear Sway Bar
Fine-tune your 6th Gen Camaro's handling and eliminate body roll. This lightweight, three-position adjustable tubular rear sway bar is 100% made in the USA.
6452F - 1963-1987 GM C10 Front Lowering Springs, 2" drop
$149.99
643233 - 1973-1987 GM C10 Street Performance A-Arm Kit
$1,488.99 – $1,568.99Price range: $1,488.99 through $1,568.99
6410 - 1973-1987 GM C10 Flip Kit
$149.99
303233 - GM A-Arm Kit, Delrin Bushings, Standard Upper Ball Joints
$1,389.99
383001 - 1982-2003 S10/S15 Handling Kit, Corner Max, Race/Street Handling
$2,948.99
3833 - 1982-2003 S10/S15 Sway Bar, Front , Solid, 1-¼”
$259.99
3059 - Competition Front End Kit
$2,259.99 – $2,309.99Price range: $2,259.99 through $2,309.99
Fine-tune your 6th Gen Camaro's handling and eliminate body roll. This lightweight, three-position adjustable tubular rear sway bar is 100% made in the USA.
Transform the handling of your 6th Gen Camaro with the UMI 2534 adjustable rear sway bar. Designed to eliminate excessive body roll and provide a finely tuned handling balance, this upgrade ensures your vehicle stays flat through the corners. The lightweight 1-1/8" tubular construction provides maximum roll resistance with minimal deflection, offering a significant performance upgrade over the factory setup while keeping unsprung weight low.
Engineered specifically for 2016–2024 Camaro models, this three-position adjustable bar allows you to dial in the perfect setup for street driving, autocross, or track days. The kit includes high-performance polyurethane bushings, heavy-duty collar clamps, and CNC-machined mount spacers for a precise fit. Available in brilliant gloss black or UMI red powder coat, you can reuse your factory end links or upgrade to UMI’s adjustable 2548 links. Every component is rigorously tested and proudly manufactured 100% in the USA.
Overview & Difficulty: Moderate DIY install requiring basic hand tools, a jack, and jack stands; takes approximately 1–3 hours. Installation requires unbolting and lowering the rear exhaust hangers to slide the factory bar out of the driver's side wheel well. The new UMI bar installs using supplied 1/4" spacers between the chassis and bushing brackets. Factory or aftermarket end links can be used. If installing adjustable end links, ensure the suspension is loaded to a neutral position before final tightening of the jam nuts to prevent pre-load.
The UMI 2534 adjustable rear sway bar is an essential upgrade for 6th Gen Camaro owners looking to maximize grip and flatten out cornering. By allowing precise adjustments to handling balance, it transforms driving dynamics for aggressive street driving, autocross, or road course competition while maintaining excellent ride quality.
Designed & Manufactured in the USA
Durable Powder-Coat
North American Raw Materials
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Fitment | 2016-2024 Chevrolet Camaro |
| Platform | 2016-2024 Camaro |
| Adjustable | No |
| Manufacturer | UMI Performance |
| Material | Chromoly |
| Modifications | None |
| Hardware | Not Included |
| Finish | Powder Coat |
| Direct Bolt-On | Yes |
| UOM | Each |
| Bushing Type | Polyurethane |
21 Years In The Industry
Proudly partnering with leading USA steel suppliers, we source the finest North American mined and milled steel
Machine-guided DOM tubing bends maintain correct geometry while maintaining material strength.
We take North-American sourced plating and precision-cut each component with the latest laser-cutting technology.
Each finished part is properly prepped and coated with high quality Tiger Dry Lac powder coat, providing a tough long-lasting finish.
Our highly-skilled welders and robotic-welders provide consistent welds and ultimate part penetration.
We take pride in providing 100% USA-Manufactured suspension components.
Flat Rate Shipping ($12.95) is only offered on Retail orders over $149 shipped via Ground in the Continental United States.
All International customers are responsible for any applicable duties and/or taxes incurred on your shipment upon delivery.
All returns are subject to the authorization of UMI Performance, Inc. Please email [email protected] for a Returned Merchandise Authorization (RMA) number. Our Sales team will either authorize or deny the request for return at its discretion. Any product returned without an issued RMA number will not be credited. All returns must be made within 30 days of delivery, be in new condition, be in original sealed packaging and include the RMA number on the outside of the packaging. No exceptions. All products and their packaging must be in new and unopened condition. Products that have been altered, installed, or modified are not returnable. All shipping costs for returns are the responsibility of the customer. All returns are subject to a 20% restocking fee as well as the original shipping charges that UMI Performance may have incurred while shipping your order.
Due to the majority of Viking products being drop shipped, we can not offer returns on any Viking products. If you purchase a Viking product be sure it fits your application. If you need technical assistance prior to placing order please contact [email protected]
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account