272829 – 1967-1969 GM F-Body Outboard Rear Shock Relocation Kit

UMI Performance
New
Click to enlarge

    Installation Pictures

      New Product - Coming Soon

      $0.00

      Would you like to be notified when this product becomes available? Submit your email below

      Add to wishlist
      Compare
      SKU: 272829 Categories: , Tag:
      Installation Instructions
      Rear Shock Mount Kit

      272829 – 1967-1969 GM F-Body Outboard Rear Shock Relocation Kit

      Eliminate rear shock mount flex and twist. High-strength double-shear mounts replace weak factory studs to maximize shock efficiency on your 1967–1969 Camaro or Firebird.

      Double Shear Mounts Outboard Shock Location High Strength Steel Viking Shock Compatible 100 Percent USA Made
      ✓
      Double-shear upper mounts eliminate the weak factory stud for maximum shock efficiency.
      ✓
      Heavy-duty leaf plates built from 1/4-inch laser-cut steel prevent twisting under load.
      ✓
      Rigid rear mounting improves shock absorber responsiveness and overall handling performance.
      ✓
      Race-proven durability tested at UMI Motorsports Park for ultimate street and track confidence.

      Description

      What it solves

      Upgrade your classic F-body's rear suspension with the UMI Performance 272829 Outboard Double Shear Rear Shock Mount Kit. This system converts the weak factory upper single stud mount into a rigid double-shear configuration, eliminating energy-wasting flex. The lower mounts are replaced by heavy-duty outboard leaf spring plates CNC-formed from 1/4-inch high-strength steel, preventing twisting under hard cornering or launch.

      Engineered for 1967–1969 Camaro and Firebird models, this bolt-on kit includes upper mounts (2728DR and 2728PA), lower leaf plates (2730), and premium hardware. It is optimized for Viking poly bushing or bearing-end shocks and includes poly bushing sleeves and aluminum spacers. Track-tested at UMI Motorsports Park, this suspension upgrade is built 100% in the USA for ultimate street and competition durability.

      Product Features

      Key details
      ✓
      Converts upper mounts to heavy-duty double shear
      ✓
      Heavy-duty leaf plates from quarter-inch steel
      ✓
      Stronger outboard shock location prevents axle twist
      ✓
      Powder coated finish for long-term corrosion resistance
      ✓
      Compatible with Viking poly bushing rear shocks
      ✓
      Multi-shock support for bushing or bearing ends
      ✓
      Proudly built and track-tested in the USA

      Detailed Features

      Technical breakdown
      ✓
      Double-shear upper mounts: Replaces the factory single-stud upper mounts to eliminate flexing and twisting, ensuring that your shocks perform at their absolute best.
      ✓
      Quarter-inch steel plates: Laser-cut and CNC-bent lower leaf spring plates replace the weak factory plates to provide a rock-solid outboard shock foundation.
      ✓
      Viking shock compatibility: Specifically designed to work seamlessly with Viking poly bushing shocks or high-performance bearing-end shocks for maximum tuning versatility.
      ✓
      Enhanced shock responsiveness: Rigid mounting design removes the squish of factory rubber biscuits, delivering direct suspension feedback and improved low-speed damping.
      ✓
      Premium powder coating: Durable, high-quality powder coated finish protects all steel components against road grime, rust, and harsh track conditions.
      ✓
      Complete installation hardware: Includes zinc-plated alloy steel socket head screws, Grade 8 thin nylock nuts, and washers for a secure bolt-on upgrade.
      ✓
      Precision-machined spacers: Comes with aluminum sway bar spacers and bushing sleeves to ensure perfect shock alignment and binding-free suspension movement.
      ✓
      Track-validated design: Thoroughly tested at UMI Motorsports Park and on the street to guarantee maximum reliability and real-world handling improvements.

      Double-Shear Mounting

      Much stronger than factory open double shear mount

      Step Spacers

      Stepped spacer design for Viking poly end shocks. Drastically improves the longevity of the poly bushings.

      Double-Shear Upper Mounts

      Double shear upper mount for improved shock performance vs the factory stud mount shock. Less deflection, reduced friction and increased durability.

      HD Thick Plating

      1/4-inch thick U-bolt plating provide solid heavy duty foundation.

      High Grade Installation Hardware

      High quality hardware ensures ease of assembly and a clean appearance.

      Product Outcomes

      On-road impact
      ✓
      Delivers sharper handling response by eliminating rear shock mounting flex.
      ✓
      Maximizes rear tire traction and contact patch stability during hard cornering.
      ✓
      Prevents leaf spring plate bending under high-horsepower acceleration and heavy loads.
      ✓
      Restores consistent shock absorber performance across both street and track conditions.
      ✓
      Enhances your overall confidence behind the wheel with a rigid rear setup.

      Installation Summary

      Before you buy

      Overview & Difficulty: This moderate DIY installation takes 2 to 4 hours to complete using basic garage tools, including jack stands, sockets, wrenches, an Allen wrench, and a torque wrench. The process involves lifting the rear chassis to let the suspension fully droop, removing the wheels, and supporting the rear axle. You will swap the factory leaf plates with the heavy-duty outboard plates, torquing the U-bolts to 55 ft-lbs in an X-pattern. Replace the upper mount (torque to 260 in-lbs), grease and install the poly sleeves, then secure the shocks, torquing the upper bolt to 50 ft-lbs.

      What’s Included:
      • Double shear driver's side upper rear shock mount (2728DR) ×1
      • Double shear passenger side upper rear shock mount (2728PA) ×1
      • Outboard lower leaf spring plates (2730) ×2
      • Zinc-plated alloy steel socket head screws, 1/2"-13 × 2-1/4" (1000206) ×4
      • Grade 8 thin nylock nuts, 1/2"-13 (1000110) ×4
      • SAE washers, 1/2" (1000015) ×4
      • Aluminum sway bar spacers (3044D) ×4
      • Polyurethane bushing spacer sleeves (2728G) ×8

      Is This Product Right for You?

      Decision guide

      The UMI 272829 outboard shock mount kit is the perfect solution for classic F-body owners who want to eliminate suspension flex and maximize shock effectiveness. By replacing weak factory single-stud upper mounts and thin leaf plates with rigid double-shear brackets, you gain immediate steering feedback, more consistent tire contact, and a rock-solid rear suspension setup.

      Best For
      ✓
      F-body owners seeking to eliminate rear suspension mount flex and twisting.
      ✓
      Autocross and road race drivers wanting consistent shock dampening and feedback.
      ✓
      Enthusiasts running high-performance Viking poly bushing or bearing-end rear shocks.
      ✓
      Builders upgrading classic muscle car leaf plates to heavy-duty track-proven steel.
      Not Ideal For
      ×
      Restorers looking for 100% factory-correct, concours-style original leaf spring plates.
      ×
      Daily drivers with stock-level shocks that do not experience hard cornering loads.
      ×
      Vehicles that do not require outboard shock configurations or heavy-duty plates.
      ×
      Beginners who lack basic suspension tools and prefer professional shop installations.

      Product FAQ

      Quick answers
      What vehicles does the UMI 272829 outboard shock mount kit fit?
      The UMI 272829 shock mount kit is designed for 1967–1969 GM F-Body vehicles, specifically Chevrolet Camaro and Pontiac Firebird models.
      How does this kit improve rear shock absorber performance?
      This kit replaces the weak factory single-stud upper shock mount with a highly rigid double-shear configuration, eliminating energy-wasting flex and allowing the shock to operate more effectively.
      Is wheel removal necessary for installing this outboard shock kit?
      Yes. You must remove the rear wheels during installation to gain clear access for replacing the leaf spring plates and shock mounts.
      What materials are used to manufacture these rear suspension plates?
      The lower leaf plates are laser-cut and CNC-formed from 1/4-inch high-strength steel, while the upper mounts are MIG-welded steel, providing a robust suspension foundation.
      How is the UMI 272829 kit protected against rust and corrosion?
      All the steel plates and brackets feature a durable, premium powder coated finish, while the mounting hardware is zinc-plated to withstand harsh weather and road grime.
      Which shock options are compatible with these double-shear mounts?
      This kit is optimized for Viking poly bushing rear shocks and is fully compatible with aftermarket high-performance shocks utilizing standard bearing-end mounts.
      Does this shock mount kit include polyurethane bushing sleeves?
      Yes. The kit includes eight polyurethane bushing spacer sleeves and four aluminum spacers to adapt the double-shear mounts to Viking poly shocks and bearing ends.
      Are these outboard shock mounts tested on real race tracks?
      Yes. These mounts have been thoroughly validated under extreme competition conditions at UMI Motorsports Park to ensure peak reliability and handling performance.
      Is all necessary hardware included in the UMI 272829 kit?
      Yes. The kit includes zinc-plated socket-head screws, thin Grade 8 nylock nuts, and washers, meaning no extra trips to the hardware store are required.
      Why choose the UMI 272829 kit over standard shock mounts?
      The UMI 272829 kit provides 1/4-inch heavy-duty outboard leaf plates and conversions to double-shear mounts, ensuring far greater strength and less twist than factory setups.
      Fitment
      Platform
      Manufacturer
      UOMPair
      HardwareIncluded
      ColorBlack, Red
      Direct Bolt-OnYes
      FinishPowder Coat
      MaterialMild Steel
      Why Choose

      UMI Performance

      21 Years In The Industry

      North American Raw Materials

      Proudly partnering with leading USA steel suppliers, we source the finest North American mined and milled steel

      Precision Bent DOM Tubing

      Machine-guided DOM tubing bends maintain correct geometry while maintaining material strength.

      Laser Cut Plating

      We take North-American sourced plating and precision-cut each component with the latest laser-cutting technology.

      Durable Powder Coating

      Each finished part is properly prepped and coated with high quality Tiger Dry Lac powder coat, providing a tough long-lasting finish.

      Consistent Welds

      Our highly-skilled welders and robotic-welders provide consistent welds and ultimate part penetration.

      100% USA Made

      We take pride in providing 100% USA-Manufactured suspension components.

        Shipping Guidelines

        Flat Rate Shipping ($12.95) is only offered on Retail orders over $149 shipped via Ground in the Continental United States.

        All International customers are responsible for any applicable duties and/or taxes incurred on your shipment upon delivery.

        Return Information

        All returns are subject to the authorization of UMI Performance, Inc. Please email [email protected] for a Returned Merchandise Authorization (RMA) number. Our Sales team will either authorize or deny the request for return at its discretion. Any product returned without an issued RMA number will not be credited. All returns must be made within 30 days of delivery, be in new condition, be in original sealed packaging and include the RMA number on the outside of the packaging. No exceptions. All products and their packaging must be in new and unopened condition. Products that have been altered, installed, or modified are not returnable. All shipping costs for returns are the responsibility of the customer. All returns are subject to a 20% restocking fee as well as the original shipping charges that UMI Performance may have incurred while shipping your order.

        Due to the majority of Viking products being drop shipped, we can not offer returns on any Viking products. If you purchase a Viking product be sure it fits your application. If you need technical assistance prior to placing order please contact [email protected]

        This '272829 - 1967-1969 GM F-Body Outboard Rear Shock Relocation Kit' fits the following platforms:

        1967-1969 GM F-Body

        • 1967-1969 Chevrolet Camaro
        • 1967-1969 Pontiac Firebird

        This 272829 - 1967-1969 GM F-Body Outboard Rear Shock Relocation Kit fits the following vehicles:

        Chevrolet

        Camaro

        • 1967 Chevrolet Camaro
        • 1968 Chevrolet Camaro
        • 1969 Chevrolet Camaro

        Pontiac

        Firebird

        • 1967 Pontiac Firebird
        • 1968 Pontiac Firebird
        • 1969 Pontiac Firebird

        RELATED PRODUCTS

        Add to wishlist

        2104 – Billet Tie Rod Adjusting Sleeves – 11/16″ Thread

        In stock

        $59.99
        SKU: 2104
        Add to cart
        Compare
        Quick view
        Add to wishlist

        2620 – GM Rear Leaf Spring Set, 2″ Lowering

        In stock

        $449.99
        SKU: 2620
        Add to cart
        Compare
        Quick view
        Add to wishlist

        2626 – GM Rear Leaf Spring Shackle Kit, Delrin

        In stock

        $169.99
        SKU: 2626
        Add to cart
        Compare
        Quick view
        Add to wishlist

        4001 – GM Lower Hardware Kit, Lower Control Arms

        In stock

        $19.99
        SKU: 4001
        Add to cart
        Compare
        Quick view
        Add to wishlist

        B204 – Viking Performance Shock, Front, Double Adjustable

        In stock

        $255.00
        SKU: B204
        Select options This product has multiple variants. The options may be chosen on the product page
        Compare
        Quick view